Aschenbrenner Elektronik GmbH

Rugged LCD-TFT color video monitor for use under harsh environmental conditions as in wheeled or tracked armoured military vehicles
Mirrored or normal display for situational awareness imagers, driver vision enhancement imagers, gunner imagers
Two video inputs useable for color- and monochrome cameras or thermal imaging cameras
Milled aluminium housing

Video overlay marking for approximate vehicle width at distances of 1 m, 2 m, 3 m and 4 m
Display brightness and intensity of control element illumination switchable for day or night ambient light
Night vision goggles compatibility
CAN-Bus version 2.0B (SAE J1939), protocols CAN-Open or CAN-CUP for advanced camera control and build in test
Version for 12 V DC board voltage available on request

Technical specifications
refer to data sheet: 01111

Display type:	7″ TFT LCD with LED Backlight
Resolution:	800 x 480 pixels (H x V)
Colors:	16.7 M (8 bit / color)
Active display:	152 x 91 mm
Contrast ratio typ:	1000:1
Brightness typ:	350 cd / m²
Viewing angle:	±70° horizontal / ±70° vertical
Display windows:	Hardened, scratch resistant acrylic glass with anti-reflective and anti-fingerprint coating
Video inputs:	2 x CVBS according to PAL and NTSC
Power inputs:	24 V DC / 20 W ref. to VG96916 24 V DC / 12 W loop through for camera heating
Power outputs:	12 V DC / 5 W for camera power supply
Control inputs:	reverse gear video overlay marking enable display & illumination enable day / night switch
Control outputs:	relay drive signal for camera washer pump and camera windows cleaning
Control buttons:	contrast, brightness, backlight camera selection, camera cleaning
Connectors:	VG 96912
EMC / EMI:	VG 95373 (MIL-STD-461G on request)
Protection:	IP 54
Temperature:	-30 °C to +75 °C (operating) -430 °C to +80 °C (storage)
Dimensions:	280 x 55 (160 if open) x 162 mm (W x H x D) w/o connectors
Weight:	approx. 2 kg
Color:	titan silver