
Technical specifications
refer to data sheet: 01257
| Sensor type: | 1/3″ SONY Exmor CMOS 1.3 Megapixels |
| Active pixels: | 1305 x 1049 (H x V) |
| Video standard: | PAL / NTSC |
| Video output: | CVBS 1 V PP / 75 Ω |
| Horizontal resolution: | more than 800 TVL |
| Exposure control: | Shutter iris Automatic gain control |
| Sensitivity (color): | 0.4 Lux; 40 IRE (Sens-Up off) |
| Sensitivity (B&W): | 0.04 Lux; 40 IRE (Sens-Up off) |
| Further improvement of sensitivity by Sens-Up: | 2x ~ 30x for normal mode 2x ~ 6x for WDR mode |
| IR cut filter removal for day and night switching: | automatically depending on the illumination intensity or controlled by CAN-Bus |
| WDR: | Using frames of Long & Short Exposure |
| Dynamic Range with WDR mode: | 120 dB |
| Noise suppression: | Enhanced 2D + 3D Dynamic Noise Reduction |
| Picture orientation: | Normal, Mirror, V-Flip, Rotate |
| Image processing: | Zoom, Pan, PIP |
| White Balance: | ATW, AWB, MANUAL |
| Standard lens: | f = 3.6 mm; F = 2 |
| Angle of view: | 72° H / 54° V (another angles of view on request) |
| CAN-Bus: | Version 2.0B (SAE J1939) with protocol CAN-Open or CAN-CUP |
| Integrated test patterns: | Grey scale, Multiburst |
| Infrared illuminator control interface: | Inputs & Outputs for dimming and function monitoring |
| Connector: | VG95234A20A48PN |
| Power supply: | 24 V DC according to VG 96916-5 |
| Power input: | < 25 W |
| Temperature: | -40 °C to +72 °C (operating) -40 °C to +90 °C (storage) |
| Dimensions: | 160 x 90 x 141 mm (W x H x D) without connector |
| Weight: | approx. 2.2 kg |
| Color: | RAL 6031 bronze green or TBD |
| EMC / EMI: | VG 95373 (MIL-STD-461E on request) |
| Protection: | IP 67 (immersion depth up to 4 m) |
| Shock / Vibration: | MIL-STD-810E |